Home Hardening

How to Harden Your Home Against Wildfire

A crew member treats dry brush near a home as part of wildfire preparation

Home hardening sounds like a big renovation project. Mostly, it isn't. It's a series of smaller fixes that add up to a house that's genuinely harder to ignite. Here's a practical rundown.

Windows

Single-pane windows can crack from radiant heat alone, letting embers and flame in. Dual-pane windows with tempered glass hold up significantly better under wildfire conditions.

Siding and Flashing

Gaps where siding meets trim, corners, or the foundation are exactly where embers accumulate and ignite. Well-installed flashing and sealed joints close off those gaps.

Roofing Class Matters

Not all roofing materials perform the same in a wildfire. Class A-rated roofing materials offer the best resistance to ignition from flying embers. It's worth checking if you don't already know your roof's rating.

Defensible Space, Zone by Zone

Cal Fire's defensible space guidance breaks the area around your home into zones:

  • Zone 0 (0 to 5 ft): The most critical zone: no combustible material should touch the structure here.
  • Zone 1 (5 to 30 ft): Remove dead vegetation, keep trees trimmed and spaced apart.
  • Zone 2 (30 to 100 ft): Thin brush and maintain irrigated, well-spaced landscaping where your lot allows it.

One More Layer: Professional Coating

Once the structural basics are handled, a professional coating application adds another layer of protection. FireClear is a Certified CitroTech® Partner, applying CitroTech's EPA Safer Choice-recognized fire inhibitor as part of our standard assessment-and-application process.

None of this needs to happen all at once. Start with what's cheapest and highest-impact (defensible space and vent screening) and work outward from there.

Request a quote